Dining Sets

Solid Teak Outdoor Dining Sets

10 models built factory-direct in Foshan, China. Every page below lists real dimensions, materials and MOQ — no "contact us to find out".

Every model below is built in PatioHue Outdoor's own workshop in Foshan — we are the factory, not a trading company, which is why you can specify dimensions, finishes and fabric directly with the people cutting and assembling your order. Posted prices are deliberately absent because every project differs in quantity, finish and freight; send quantities and a destination port and we come back with real numbers, usually within 12 hours.

A dining set is the hardest-working thing on a terrace: breakfast service, long family lunches and evening drinking all happen at the same table. We build ours around kiln-dried solid teak, cut with traditional mortise-and-tenon joints and finished by hand, so frames stay square through years of being dragged across stone and rained on between services.

Sets ship as a complete package — table plus correctly matched chairs — which removes the usual headache of mixing suppliers. Chair count, table length, umbrella hole and folding or stacking behaviour can all be specified per project, and KD options cut your freight cost per seat.

Compare every outdoor dining set at a glance

ModelKey dimensionsPackingMOQDetail
WH-DN-2001Ø110 × 75 cm1 table + 4 chairs / 3 cartons10 setsNordic Rope-Woven Dining Set – 4 Seater
WH-DN-2002180 × 90 × 75 cm1 table + 6 chairs / 4 cartons10 setsNordic Rope-Woven Dining Set – 6 Seater
WH-DN-2101200 × 100 × 75 cm1 table + 6 chairs / 5 cartons5 setsLeisure Teak Dining Set – 6 Seater
WH-DN-2102240 × 100 × 75 cm1 table + 8 chairs / 6 cartons5 setsLeisure Teak Dining Set – 8 Seater
WH-DN-2201120 × 120 × 75 cm1 table + 4 chairs / 3 cartons10 setsHotel Teak Dining Set – 4 Seater
WH-DN-2202Ø150 × 75 cm1 table + 6 chairs / 4 cartons10 setsHotel Teak Dining Set – 6 Seater
WH-DN-2301Ø70 × 72 cm1 set / 1 carton20 setsTeak Balcony Bistro Set – 2 Seater
WH-DN-2302Ø110 × 74 cm1 table + 4 chairs / 3 cartons10 setsTeak Leisure Dining Combo – 4 Seater
WH-DN-2401210 × 95 × 75 cm1 table + 6 chairs / 5 cartons5 setsTeak Garden Dining Combo – 6 Seater
WH-DN-2402250 × 100 × 75 cm1 table + 8 chairs / 6 cartons5 setsTeak Garden Dining Combo – 8 Seater

How to choose

  • Allow 60 cm of table edge per person. That is why a 180 cm table seats six comfortably and eight only at a squeeze.
  • Standard dining height is 74–76 cm with a 45 cm seat height. Anything lower reads as lounge furniture and guests notice.
  • Check whether the table has an umbrella hole and its diameter — 50 mm and 38 mm are the common sizes and the parasol must match.
  • Stacking or folding chairs decide your off-season storage. Four stacked chairs occupy roughly the floor area of one.
  • Ask whether the table knock-down (KD). KD frames can reduce total shipped cube by 25–35% versus fully welded or pre-assembled tops.
  • Match the timber across the set. Tables and chairs cut from different batches can differ noticeably in tone once they weather.
  • For contract use, look for reinforced aprons and stretchers on long tables — they stop the wobble that develops after years of service.
  • Order a spare chair or two per ten. Chairs take the most abuse and replacement lead times are longer than anyone expects.

How we build them

Timber is kiln dried to 8–12% moisture before cutting, then jointed with mortise-and-tenon and 304 stainless hardware rather than screw-and-glue assembly. Every frame is hand-sanded to 180–240 grit, finished with oil or a water-based sealer, and packed in drop-tested export cartons. Knocked-down options are available on most models and can reduce shipped cube significantly.

Care and maintenance

Wash down a few times each season with water and a pH-neutral soap; a soft brush lifts dirt from the grain. Teak left outdoors weathers to silver-grey — this is cosmetic, not decay. If you want to keep the honey tone, apply a water-based teak sealer once or twice a year. Never use bleach or a high-pressure washer on the surface.

Common questions

Can we mix models in one container?

Yes. Most buyers combine a primary model with a smaller quantity of alternatives to test the market, subject to each model's stated MOQ. We prepare a single loading plan for the whole shipment so you can book freight against real carton counts and cube figures.

Do you accept OEM drawings and private label?

Yes — size, finish, hardware, cushion fabric and branding can all be adjusted, and we quote from drawings or reference photographs. Private-label cartons, manuals and logo application are available above MOQ.

What documentation comes with the shipment?

Standard export documents, packing list, loading plan and finishing specification. Timber origin documentation and FSC chain-of-custody are available on request; tell us which market you are importing into and we will confirm what that destination requires.

Can we get spare parts later?

Yes. Slats, bolts, catches, wheels and cushion covers are held in stock for current models, and we ship parts with your next order without extra freight when combined.

Dining Sets

All 10 models

See the complete catalog · Outdoor Sofa Sets · Solid Teak Dining Tables · Teak Sun Loungers

Need a quote on outdoor dining sets?

Send quantities and your destination port. We reply with pricing, lead time and packing details within 12 hours.