WH-DN-2101 · Dining Sets

Leisure Teak Dining Set – 6 Seater

All-teak garden dining set, oiled by hand and made to grey beautifully outdoors.

100% solid teakHand-oiled finishMortise & tenonFree replacement parts
MOQ
5 sets
Price
Contact for price

Specifications

Table Size200 × 100 × 75 cm
Chair Size46 × 55 × 90 cm
WoodSolid teak, kiln-dried 8–12%
ThicknessTable top 2.5 cm
Umbrella HoleØ50 mm
FinishHand-rubbed teak oil
N.W.68 kg
Package1 table + 6 chairs / 5 cartons
Product overview

Leisure Teak Dining Set – 6 Seater

All-teak garden dining set, oiled by hand and made to grey beautifully outdoors.

A classic all-teak garden set. Every part that touches the ground is solid teak, joined with mortise-and-tenon instead of screws, so the frame stays tight year after year. Left outdoors it weathers to a silver-grey patina; a light oiling keeps the honey tone.

The WH-DN-2101 measures 200 × 100 × 75 cm overall. Key figures: table size 200 × 100 × 75 cm, chair size 46 × 55 × 90 cm, wood Solid teak, kiln-dried 8–12%, thickness Table top 2.5 cm, shipped 1 table + 6 chairs / 5 cartons at a net weight of 68 kg. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.

Seat count is the first decision and the one most often got wrong. Six people around a 150 cm table is a squeeze; seven around 180 cm is comfortable. We will tell you honestly if the configuration you have in mind will not seat your target number, because nobody thanks a supplier for a terrace that does not work on day one.

Restaurant and hotel buyers usually care about three things beyond looks: can staff clear the deck quickly, can we get parts years later, and how much shipped volume are we paying for. Our sets answer all three — stacking or folding chairs, spare parts held for current models, and knocked-down packing that typically trims 25–35% off the cube versus assembled frames.

Key features of the WH-DN-2101

  • 100% solid teak — specified on this model and available across our outdoor dining sets range.
  • Hand-oiled finish — specified on this model and available across our outdoor dining sets range.
  • Mortise & tenon — specified on this model and available across our outdoor dining sets range.
  • Free replacement parts — specified on this model and available across our outdoor dining sets range.
  • Dimensions — 200 × 100 × 75 cm overall, table size 200 × 100 × 75 cm, chair size 46 × 55 × 90 cm, wood Solid teak, kiln-dried 8–12%, thickness Table top 2.5 cm.
Where it works

Typical applications

Where buyers are putting the WH-DN-2101 to work.

Villa courtyard and loggia

A permanent table under stone arches — teak greys into the setting instead of fighting it.

Small balcony and sun room

Folding or compact sets that fold flat against a wall when not in use.

Resort breakfast deck

Uniform tables laid out across a deck; KD frames keep replacement cost low when a storm damages stock.

Café pavement seating

Stacks after service and handles daily wiping down without the finish breaking down.

Material & build

How the WH-DN-2101 is made

A classic all-teak garden set. Every part that touches the ground is solid teak, joined with mortise-and-tenon instead of screws, so the frame stays tight year after year. Left outdoors it weathers to a silver-grey patina; a light oiling keeps the honey tone.

Material: 100% solid teak (table top, legs and chair frames), brass and stainless hardware.

Every WH-DN-2101 is cut, jointed, sanded and finished in PatioHue Outdoor's own workshop in Foshan, so the same hands make your sample and your production order. Nothing is outsourced to a second factory when volumes get tight.

Kiln-Dried Timber

Dried to 8–12% moisture before cutting, so the frame stays stable in humid or dry climates.

Joinery & Hardware

Mortise-and-tenon joints with 304 stainless bolts and brass inserts — no visible screw heads.

Export Packing

Cartons are drop-tested; KD options reduce container cube. Loading plans prepared per order.

Customization

Size, finish, cushion fabric and brand label can all be adjusted. Drawings accepted.

Buyer's notes

What to check before ordering

  • For contract use, look for reinforced aprons and stretchers on long tables — they stop the wobble that develops after years of service.
  • Order a spare chair or two per ten. Chairs take the most abuse and replacement lead times are longer than anyone expects.
  • Allow 60 cm of table edge per person. That is why a 180 cm table seats six comfortably and eight only at a squeeze.
  • Standard dining height is 74–76 cm with a 45 cm seat height. Anything lower reads as lounge furniture and guests notice.
  • Check whether the table has an umbrella hole and its diameter — 50 mm and 38 mm are the common sizes and the parasol must match.

Care and maintenance

Wash down a few times each season with water and a pH-neutral soap; a soft brush lifts dirt from the grain. Teak left outdoors weathers to silver-grey — this is cosmetic, not decay. If you want to keep the honey tone, apply a water-based teak sealer once or twice a year. Never use bleach or a high-pressure washer on the surface.

Customisation, OEM and private label

Size, finish, hardware and edge profile can all be adjusted on the WH-DN-2101, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.

Packing, shipping and lead time

Ships 1 table + 6 chairs / 5 cartons, net weight 68 kg. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.

FAQ

Frequently asked questions

If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.

What are the exact dimensions of the WH-DN-2101?

Leisure Teak Dining Set – 6 Seater measures 200 × 100 × 75 cm overall; the full specification runs table size 200 × 100 × 75 cm, chair size 46 × 55 × 90 cm, wood Solid teak, kiln-dried 8–12%, thickness Table top 2.5 cm. Net weight is 68 kg and it ships 1 table + 6 chairs / 5 cartons. If you need dimensions outside this range, we quote custom sizes from drawings.

What is the minimum order quantity for the WH-DN-2101?

MOQ is 5 sets. Mixed containers are fine — you can combine models across our dining sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.

Do you offer OEM, custom sizes and private label?

Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.

Can we buy tables and chairs separately?

Yes. Some buyers order extra chairs per table, others only want replacement tops. We quote both ways and can match existing pieces from a photo and dimension sheet.

How does it hold up in full sun and heavy rain?

Teak was used for ship decks for this reason. The natural oil content resists rot and insect attack, and kiln drying to 8–12% moisture means the frame does not crack when humidity swings. Let it weather or reseal it — both are acceptable, neither damages the structure.

Can you add our own brand label?

Yes. We print or laser your logo on the underside of tops or on a discreet frame location, and can produce woven labels for cushions. Private-label packing and instruction sheets are available from the stated MOQ.

What is the lead time?

Standard production is around 25–35 days after deposit depending on quantity and finish, plus shipping. Repeat orders are usually faster because patterns are already set up. Peak-season bookings should be placed earlier — January to April fills first for European summer delivery.

Get pricing for the WH-DN-2101

Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.

You may also like

Related products

Browse the full catalog · All outdoor dining sets