Aluminium dining set built for daily terrace service and off-season stacking.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
Aluminium dining set built for daily terrace service and off-season stacking.
An aluminium dining set specified for commercial service: stackable chairs, sling or rope seats, and a colour that holds across repeat orders.
The AL-DN-06 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
What decides whether an aluminium dining set works commercially is not the frame — it is the chair. Stacking chairs cut off-season storage to roughly a quarter of the deck footprint, sling seats dry in the sun without a cushion, and a seat height of 45–48 cm with a 60 cm table overhang is what makes a long lunch comfortable rather than tolerated. We publish chair and table dimensions separately on every model so you can check them against your floor plan.
Table tops are where buyers have the most choice. Solid teak gives warmth and can be re-sanded years later; sintered stone gives the marble look of a high-end hospitality terrace without the sealing and etching problems of real stone and at only 12 mm thick; HPL is the value option for high-volume café and balcony orders. All three are supported on an aluminium under-rail so a 200 cm span does not sag.
Where buyers are putting the AL-DN-06 to work.
Daily service in the sun and rain with no cushion programme and no annual oiling weekend for staff.
Compact two-seat sets in sintered stone or HPL that survive constant use and go under cover in winter.
Small-footprint sets for developer handover — the same unit specification repeated hundreds of times.
Salt air attacks steel and untreated metal; powder-coated aluminium with stainless fixings leaves no rust streaks on pale decking.
An aluminium dining set specified for commercial service: stackable chairs, sling or rope seats, and a colour that holds across repeat orders.
Material: Powder-coated aluminium frame, textilene or woven rope seats, teak / sintered-stone / HPL top.
Every AL-DN-06 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Check chair bolts and glides at the start of each season; aluminium does not corrode, but a bolt loosened by daily dragging still needs a quarter turn. Sling and rope seats need only a rinse. Teak tops can be left to silver or sealed annually to keep the honey tone; sintered stone and HPL need nothing at all.
Size, finish, hardware and edge profile can all be adjusted on the AL-DN-06, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Aluminium Dining Set – 06 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 10 sets. Mixed containers are fine — you can combine models across our aluminium dining sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
It depends on the top you choose. Solid metal holds heat, which is why we finish tables in teak, sintered stone or HPL rather than bare aluminium sheet. On the AL-DN-06 the top is specified in the table above, all of which stay comfortable to touch in direct sun.
Roughly a third of the weight for the same section — this AL-DN-06 is listed in the table above. That makes repositioning a one-person job and cuts freight per cover, but it also means wind becomes the consideration on exposed rooftops and seafront decks. Tell us the location and we will say plainly whether ballast is needed.
Yes — a single RAL number is all we need, applied to the whole frame rather than to panels, which is why a repeat order two years later matches the first without the variation you get when specifying natural timber. Custom powder colours may carry a small minimum quantity depending on the shade.
Solid teak, sintered stone (marble-look, 12 mm) and HPL, all on an aluminium under-rail. Teak is the warmest and can be re-sanded; sintered stone resists wine and citrus and never needs sealing; HPL is the value option for volume café and balcony orders.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Contract dining set with sling chairs that stack — built for daily terrace service.
White aluminium frame, woven rope-back chairs and a thick solid teak top.
Marble-look sintered stone top with black rope chairs — high-end look, no sealing.