Marble-look sintered stone top with black rope chairs — high-end look, no sealing.
| Table Size | 240 × 100 × H75 cm |
|---|---|
| Chair Size | 60 × 58 × H76 cm |
| Seats | 8 |
| Table Top | Sintered stone, 12 mm |
| Frame | Powder-coated aluminium |
| N.W. | 124 kg |
| Package | 1 set / 5 cartons |
Marble-look sintered stone top with black rope chairs — high-end look, no sealing.
Sintered stone gives the marble look of a high-end hospitality terrace without the sealing, etching and weight problems of real stone. It is UV-stable, resists red wine and citrus, and the top is only 12 mm thick so the table does not need a crane to place it.
The AL-DN-7103 measures 240 × 100 × H75 cm overall. Key figures: table size 240 × 100 × H75 cm, chair size 60 × 58 × H76 cm, seats 8, table top Sintered stone, 12 mm, shipped 1 set / 5 cartons at a net weight of 124 kg. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Table tops are where buyers have the most choice. Solid teak gives warmth and can be re-sanded years later; sintered stone gives the marble look of a high-end hospitality terrace without the sealing and etching problems of real stone and at only 12 mm thick; HPL is the value option for high-volume café and balcony orders. All three are supported on an aluminium under-rail so a 200 cm span does not sag.
Because the whole set is welded and coated to a standard colour, a repeat order two years later matches the first — a single RAL number is all we need. That consistency is why restaurant groups and hotel chains specify aluminium for terraces they refurbish on a rolling programme rather than all at once.
Where buyers are putting the AL-DN-7103 to work.
Compact two-seat sets in sintered stone or HPL that survive constant use and go under cover in winter.
Small-footprint sets for developer handover — the same unit specification repeated hundreds of times.
Salt air attacks steel and untreated metal; powder-coated aluminium with stainless fixings leaves no rust streaks on pale decking.
Open weave and sling seats dry in minutes, so a shower does not close half the terrace until tomorrow.
Sintered stone gives the marble look of a high-end hospitality terrace without the sealing, etching and weight problems of real stone. It is UV-stable, resists red wine and citrus, and the top is only 12 mm thick so the table does not need a crane to place it.
Material: Powder-coated aluminium frame, sintered stone (marble-look) top, hand-woven HDPE rope chairs, stainless 304 fixings.
Every AL-DN-7103 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Wash with fresh water and a mild pH-neutral soap a few times a season; wipe the table top after service. No polish, oil or sealer is required and none should be applied. Rinse thoroughly in coastal or chlorinated environments. For scuff marks on the powder coating, a non-abrasive cream cleaner on a soft cloth usually lifts them without dulling the finish — do not use wire wool or aggressive solvents.
Size, finish, hardware and edge profile can all be adjusted on the AL-DN-7103, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships 1 set / 5 cartons, net weight 124 kg. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Sintered-Stone Top Dining Set with Rope Chairs – 8 Seater measures 240 × 100 × H75 cm overall; the full specification runs table size 240 × 100 × H75 cm, chair size 60 × 58 × H76 cm, seats 8, table top Sintered stone, 12 mm. Net weight is 124 kg and it ships 1 set / 5 cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 3 sets. Mixed containers are fine — you can combine models across our aluminium dining sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
Yes — a single RAL number is all we need, applied to the whole frame rather than to panels, which is why a repeat order two years later matches the first without the variation you get when specifying natural timber. Custom powder colours may carry a small minimum quantity depending on the shade.
Solid teak, sintered stone (marble-look, 12 mm) and HPL, all on an aluminium under-rail. Teak is the warmest and can be re-sanded; sintered stone resists wine and citrus and never needs sealing; HPL is the value option for volume café and balcony orders.
A freshwater rinse a few times a season and a mild soap wash is the whole list. There is no oiling, sealing or re-varnishing, and unlike timber there is no colour change to expect. This AL-DN-7103 is the option for properties that will not run a furniture maintenance programme.
Yes, and many buyers do — teak for the visible statement pieces and aluminium where the maintenance burden would otherwise fall on staff. Both are built in our own workshops, so they ship together with a single loading plan and one set of documents.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Contract dining set with sling chairs that stack — built for daily terrace service.
White aluminium frame, woven rope-back chairs and a thick solid teak top.
Compact bistro table and sling chairs — the volume SKU for cafés and balconies.