AL-BC-03 · Aluminium Dining Sets

Aluminium Bar Chair – 03

Aluminium bar stool that stacks for off-season storage.

No rust, no oilingStackable optionOEM / ODM available
MOQ
10 sets
Price
Contact for price

Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.

Specifications

Custom SizingMade to your required dimensions
Product overview

Aluminium Bar Chair – 03

Aluminium bar stool that stacks for off-season storage.

A rust-free aluminium bar stool that stacks for off-season storage — light, robust and maintenance-free for commercial decks.

The AL-BC-03 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.

Table tops are where buyers have the most choice. Solid teak gives warmth and can be re-sanded years later; sintered stone gives the marble look of a high-end hospitality terrace without the sealing and etching problems of real stone and at only 12 mm thick; HPL is the value option for high-volume café and balcony orders. All three are supported on an aluminium under-rail so a 200 cm span does not sag.

Because the whole set is welded and coated to a standard colour, a repeat order two years later matches the first — a single RAL number is all we need. That consistency is why restaurant groups and hotel chains specify aluminium for terraces they refurbish on a rolling programme rather than all at once.

Key features of the AL-BC-03

  • No rust, no oiling — specified on this model and available across our aluminium dining sets range.
  • Stackable option — specified on this model and available across our aluminium dining sets range.
  • OEM / ODM available — specified on this model and available across our aluminium dining sets range.
  • Dimensions — Made to your required dimensions overall, custom sizing Made to your required dimensions.
Where it works

Typical applications

Where buyers are putting the AL-BC-03 to work.

Staff canteen and rooftop breakout

Contract-grade frames that take daily commercial use and can be hosed down at the end of the week.

Villa and holiday-let dining

Guests use it hard and nobody is there to maintain it — aluminium is the material that tolerates that.

Restaurant terrace

Chairs stack four high so the deck clears in minutes, and the whole set wipes down with a cloth between sittings.

Hotel breakfast terrace

Daily service in the sun and rain with no cushion programme and no annual oiling weekend for staff.

Material & build

How the AL-BC-03 is made

A rust-free aluminium bar stool that stacks for off-season storage — light, robust and maintenance-free for commercial decks.

Material: Powder-coated aluminium bar stool, stackable, rust-free.

Every AL-BC-03 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.

Chromate Pre-Treatment

Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.

1.5–2.0 mm Wall Tube

Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.

Export Packing

Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.

Any RAL Colour

Custom powder colour from a single RAL number, with a repeat order that matches years later.

Buyer's notes

What to check before ordering

  • Confirm the table top material. Teak is warm and re-sandable, sintered stone is marble-look without sealing, HPL is the value choice for volume orders.
  • Ask for the powder-coating specification, not just the word aluminium. Chromate pre-treatment is what stops the finish flaking in year three.
  • For a 200 cm or longer table, ask about an under-rail or centre leg. Without one, long spans sag within a season.
  • Check the fasteners — stainless 304 or 316 should be named explicitly. Plated steel fittings stain the frame with rust even on aluminium.
  • Sling and open-weave seats dry faster than padded ones and remove the need for a cushion storage plan.

Care and maintenance

Wash with fresh water and a mild pH-neutral soap a few times a season; wipe the table top after service. No polish, oil or sealer is required and none should be applied. Rinse thoroughly in coastal or chlorinated environments. For scuff marks on the powder coating, a non-abrasive cream cleaner on a soft cloth usually lifts them without dulling the finish — do not use wire wool or aggressive solvents.

Customisation, OEM and private label

Size, finish, hardware and edge profile can all be adjusted on the AL-BC-03, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.

Packing, shipping and lead time

Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.

FAQ

Frequently asked questions

If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.

What are the exact dimensions of the AL-BC-03?

Aluminium Bar Chair – 03 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.

What is the minimum order quantity for the AL-BC-03?

MOQ is 10 sets. Mixed containers are fine — you can combine models across our aluminium dining sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.

Do you offer OEM, custom sizes and private label?

Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.

Can we have a custom colour?

Yes — a single RAL number is all we need, applied to the whole frame rather than to panels, which is why a repeat order two years later matches the first without the variation you get when specifying natural timber. Custom powder colours may carry a small minimum quantity depending on the shade.

What table top options are available?

Solid teak, sintered stone (marble-look, 12 mm) and HPL, all on an aluminium under-rail. Teak is the warmest and can be re-sanded; sintered stone resists wine and citrus and never needs sealing; HPL is the value option for volume café and balcony orders.

Does it need any maintenance at all?

A freshwater rinse a few times a season and a mild soap wash is the whole list. There is no oiling, sealing or re-varnishing, and unlike timber there is no colour change to expect. This AL-BC-03 is the option for properties that will not run a furniture maintenance programme.

Can we mix aluminium and teak in one order?

Yes, and many buyers do — teak for the visible statement pieces and aluminium where the maintenance burden would otherwise fall on staff. Both are built in our own workshops, so they ship together with a single loading plan and one set of documents.

Get pricing for the AL-BC-03

Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.

You may also like

Related products

Aluminium Dining Sets Aluminium Stackable Dining Set – 8 Seater
AL-DN-7101

Aluminium Stackable Dining Set

Contract dining set with sling chairs that stack — built for daily terrace service.

Size: 220 × 100 × H75 cm
MOQ: 5 sets
Contact for price Send Inquiry

Browse the full catalog · All aluminium dining sets