AL-SL-6104 · Aluminium Sun Loungers

Birdcage Cabana Daybed

Two-metre cage daybed that gives guests shade and privacy without walls.

2 m cage shellShade without wallsIndoor-lounge feel outdoorsOptional side table
MOQ
3 sets
Price
Contact for price

Specifications

SizeØ200 × H200 cm
Side TableØ80 × H70 cm
FramePowder-coated aluminium ribs
WeaveUV-stabilised HDPE rope
Load250 kg
N.W.86 kg
Package1 set / 3 cartons
Product overview

Birdcage Cabana Daybed

Two-metre cage daybed that gives guests shade and privacy without walls.

The hardest-working piece in a beach club: it reads as a private room from across the deck, costs less than a built cabana, and can be moved when the layout changes. The open weave keeps air moving, which is why guests use it at midday when cushioned seating is too hot.

The AL-SL-6104 measures Ø200 × H200 cm overall. Key figures: size Ø200 × H200 cm, side table Ø80 × H70 cm, frame Powder-coated aluminium ribs, weave UV-stabilised HDPE rope, shipped 1 set / 3 cartons at a net weight of 86 kg. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.

Weight is the one thing to plan for. Aluminium loungers are light enough for one person to reposition, which is an advantage until the wind arrives. On exposed rooftops and seafront decks we offer weighted base options and will tell you plainly when a frame needs ballast rather than selling you something that will move.

Sun loungers take the worst of it: full sun, chlorinated splash, salt spray and guests who move them every day. Aluminium is the material that tolerates all four. The frames are welded and powder-coated in-house with a chromate pre-treatment, so nothing rusts onto pale decking, and the tops are either wide-pitch aluminium slats or tensioned mesh that drain instantly instead of holding water until tomorrow.

Key features of the AL-SL-6104

  • 2 m cage shell — specified on this model and available across our aluminium sun loungers and daybeds range.
  • Shade without walls — specified on this model and available across our aluminium sun loungers and daybeds range.
  • Indoor-lounge feel outdoors — specified on this model and available across our aluminium sun loungers and daybeds range.
  • Optional side table — specified on this model and available across our aluminium sun loungers and daybeds range.
  • Dimensions — Ø200 × H200 cm overall, size Ø200 × H200 cm, side table Ø80 × H70 cm, frame Powder-coated aluminium ribs, weave UV-stabilised HDPE rope.
Where it works

Typical applications

Where buyers are putting the AL-SL-6104 to work.

Resort cabana and plunge pool

A daybed reads as a private room from across the deck and costs a fraction of a built cabana.

Rooftop pool and sky deck

Light enough for one person to reset the layout, with weighted base options where wind is the constraint.

Villa pool terrace

Loungers that can stay out all season and be hosed down before guests arrive.

Cruise and marina deck

Low maintenance and low weight, which matters on any deck where load is calculated.

Material & build

How the AL-SL-6104 is made

The hardest-working piece in a beach club: it reads as a private room from across the deck, costs less than a built cabana, and can be moved when the layout changes. The open weave keeps air moving, which is why guests use it at midday when cushioned seating is too hot.

Material: Powder-coated aluminium ribs, hand-woven HDPE rope shell, quick-dry foam cushions in solution-dyed acrylic, optional side table.

Every AL-SL-6104 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.

Chromate Pre-Treatment

Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.

1.5–2.0 mm Wall Tube

Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.

Export Packing

Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.

Any RAL Colour

Custom powder colour from a single RAL number, with a repeat order that matches years later.

Buyer's notes

What to check before ordering

  • Ask whether it stacks. Stackable loungers cut off-season storage to a fraction of the space and are the difference between a usable store room and a corridor full of beds.
  • Wide slat spacing or tensioned mesh keeps the surface cooler and drains instantly — a closed panel holds heat and water.
  • Check the frame specification: chromate pre-treatment before powder coating is what stops the finish flaking at the weld edges in year three.
  • For exposed or windy sites ask about weight or ballast options. Aluminium is light, which is an advantage for staff and a question in the wind.
  • Confirm whether a cushion is required. Slatted and mesh tops need none, which removes an entire housekeeping task.

Care and maintenance

Cushions: brush off sand, spot-clean with mild soap and water, and store dry during long wet periods or over the off-season — that alone adds years to their life. Slatted and mesh tops need only a rinse and dry in minutes. Touch-up paint is available in the frame colour of your order.

Customisation, OEM and private label

Size, finish, fabric, cushion density can all be adjusted on the AL-SL-6104, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.

Packing, shipping and lead time

Ships 1 set / 3 cartons, net weight 86 kg. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.

FAQ

Frequently asked questions

If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.

What are the exact dimensions of the AL-SL-6104?

Birdcage Cabana Daybed measures Ø200 × H200 cm overall; the full specification runs size Ø200 × H200 cm, side table Ø80 × H70 cm, frame Powder-coated aluminium ribs, weave UV-stabilised HDPE rope. Net weight is 86 kg and it ships 1 set / 3 cartons. If you need dimensions outside this range, we quote custom sizes from drawings.

What is the minimum order quantity for the AL-SL-6104?

MOQ is 3 sets. Mixed containers are fine — you can combine models across our aluminium sun loungers range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.

Do you offer OEM, custom sizes and private label?

Yes. Size, finish, fabric and cushion density can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.

Does it need any maintenance at all?

A freshwater rinse a few times a season, weekly in coastal or chlorinated locations, and a mild soap wash is the whole list. There is no oiling, sealing or re-varnishing, and unlike timber there is no colour change to expect. This AL-SL-6104 is the option for properties that will not run a furniture maintenance programme.

Can we mix aluminium and teak in one order?

Yes, and many buyers do — teak for the statement pieces and aluminium where the maintenance burden would otherwise fall on staff. Both are built in our own workshops, so they ship together with a single loading plan and one set of documents.

Does the lounger need a cushion?

It depends on the top. The AL-SL-6104 is specified with tensioned mesh, so it is comfortable without a cushion and drains instantly. A pad is available if guests expect one.

How many backrest positions are there?

The AL-SL-6104 adjusts through several positions from upright reading to flat sunbathing. Catches are metal rather than plastic, and they are the part we hold spares for.

Get pricing for the AL-SL-6104

Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.

You may also like

Related products

Aluminium Sun Loungers Round Aluminium Rope Daybed
AL-SL-6103

Round Aluminium Rope Daybed

Full-circle daybed with a woven rope back — a focal point for poolside and spa decks.

Size: Ø165 × H80 cm
MOQ: 5 pcs
Contact for price Send Inquiry

Browse the full catalog · All aluminium sun loungers and daybeds