AL-SL-14 · Aluminium Sun Loungers

Aluminium Sun Lounger – 14

A rust-free aluminium lounger, light enough to reset by one person.

No rust, no oilingStackable optionOEM / ODM available
MOQ
5 sets
Price
Contact for price

Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.

Specifications

Custom SizingMade to your required dimensions
Product overview

Aluminium Sun Lounger – 14

A rust-free aluminium lounger, light enough to reset by one person.

A rust-free aluminium lounger for properties that will not run a cushion programme. Light enough for one person to reposition, robust enough for daily guest use.

The AL-SL-14 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.

The specification questions that matter on a lounger are backrest positions, whether it stacks, and whether it needs a cushion. Four to five backrest positions cover reading and flat sunbathing; loungers that stack cut off-season storage to a fraction of the space; and a slatted or mesh top needs no cushion at all, which removes the whole business of bringing twelve cushions in every evening.

Daybeds are a different buying decision — they sell a photograph as much as a seat. Our round and cage designs are sized to fit a standard cabana rather than dominate it, and the open weave keeps air moving, which is precisely why guests use them at midday when cushioned seating is too hot.

Key features of the AL-SL-14

  • No rust, no oiling — specified on this model and available across our aluminium sun loungers and daybeds range.
  • Stackable option — specified on this model and available across our aluminium sun loungers and daybeds range.
  • OEM / ODM available — specified on this model and available across our aluminium sun loungers and daybeds range.
  • Dimensions — Made to your required dimensions overall, custom sizing Made to your required dimensions.
Where it works

Typical applications

Where buyers are putting the AL-SL-14 to work.

Beach club and seafront

Salt air eats untreated metal; powder-coated aluminium with stainless fixings leaves no rust streaks on pale decking.

Spa and wellness garden

Round and cage daybeds give guests shade and privacy without enclosing them, and stay usable at midday.

Resort cabana and plunge pool

A daybed reads as a private room from across the deck and costs a fraction of a built cabana.

Rooftop pool and sky deck

Light enough for one person to reset the layout, with weighted base options where wind is the constraint.

Material & build

How the AL-SL-14 is made

A rust-free aluminium lounger for properties that will not run a cushion programme. Light enough for one person to reposition, robust enough for daily guest use.

Material: Powder-coated aluminium frame and slats, 304 stainless fittings; stays cool and stacks for storage.

Every AL-SL-14 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.

Chromate Pre-Treatment

Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.

1.5–2.0 mm Wall Tube

Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.

Export Packing

Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.

Any RAL Colour

Custom powder colour from a single RAL number, with a repeat order that matches years later.

Buyer's notes

What to check before ordering

  • Check the frame specification: chromate pre-treatment before powder coating is what stops the finish flaking at the weld edges in year three.
  • For exposed or windy sites ask about weight or ballast options. Aluminium is light, which is an advantage for staff and a question in the wind.
  • Confirm whether a cushion is required. Slatted and mesh tops need none, which removes an entire housekeeping task.
  • Check the wheels. Rubberised wheels protect decking and are replaceable — plastic ones are not, and they mark stone.
  • Ask for a published static load figure if the loungers are going into a contract or insured operation.

Care and maintenance

Cushions: brush off sand, spot-clean with mild soap and water, and store dry during long wet periods or over the off-season — that alone adds years to their life. Slatted and mesh tops need only a rinse and dry in minutes. Touch-up paint is available in the frame colour of your order.

Customisation, OEM and private label

Size, finish, hardware and edge profile can all be adjusted on the AL-SL-14, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.

Packing, shipping and lead time

Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.

FAQ

Frequently asked questions

If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.

What are the exact dimensions of the AL-SL-14?

Aluminium Sun Lounger – 14 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.

What is the minimum order quantity for the AL-SL-14?

MOQ is 5 sets. Mixed containers are fine — you can combine models across our aluminium sun loungers range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.

Do you offer OEM, custom sizes and private label?

Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.

Will the powder coating flake off?

Not with the specification used on the AL-SL-14. The frame is degreased and chromate pre-treated before the powder is applied and cured, so the coating keys into the metal chemically rather than sitting on it. That is the difference between a finish that survives salt and chlorinated splash for years and one that starts lifting at the weld edges after a couple of seasons.

Does the frame get too hot in the sun?

Bare aluminium does absorb heat, which is why specification matters. On the AL-SL-14 the lying surface is wide-pitch aluminium slats with air moving between them, so it stays noticeably cooler than a closed metal panel and dries minutes after a shower.

Will it blow around on an exposed deck?

Aluminium is roughly a third of the weight of the equivalent teak frame, which is an advantage for staff and a question in the wind. Tell us the location: for exposed rooftops and seafront decks we supply weighted base options and will say plainly when a frame needs ballast rather than selling you something that will move.

Do the loungers stack for winter?

Yes — the AL-SL-14 stacks, which is what makes off-season storage realistic rather than a corridor full of beds.

Get pricing for the AL-SL-14

Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.

You may also like

Related products

Aluminium Sun Loungers Round Aluminium Rope Daybed
AL-SL-6103

Round Aluminium Rope Daybed

Full-circle daybed with a woven rope back — a focal point for poolside and spa decks.

Size: Ø165 × H80 cm
MOQ: 5 pcs
Contact for price Send Inquiry

Browse the full catalog · All aluminium sun loungers and daybeds