Curved rope back with solid teak table tops — warmth of timber, maintenance of aluminium.
| 3-Seater Size | 207 × 82 × 78 cm |
|---|---|
| Armchair Size | 91 × 81 × 78 cm |
| Coffee Table | 119 × 61 × 41 cm |
| Side Table | 55 × 55 × 52 cm |
| Seat Height | 43 cm |
| Frame | Powder-coated aluminium |
| Table Top | Solid teak, 3 cm |
| N.W. | 58 kg |
| Package | 1 set / 4 cartons |
Curved rope back with solid teak table tops — warmth of timber, maintenance of aluminium.
The compromise buyers ask for most often: the look and warmth of a timber-topped set, but a frame that does not need oiling and will not crack if it is left out through a wet winter. The oval teak-top coffee table is thick enough to re-sand years later.
The AL-SF-5103 measures 207 × 82 × 78 cm overall. Key figures: 3-seater size 207 × 82 × 78 cm, armchair size 91 × 81 × 78 cm, coffee table 119 × 61 × 41 cm, side table 55 × 55 × 52 cm, shipped 1 set / 4 cartons at a net weight of 58 kg. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Weight matters more than buyers expect. An aluminium sofa is roughly a third of the weight of the same teak section, which means one member of staff can reset a terrace layout in the morning instead of two — and it also means wind becomes the constraint rather than floor loading. For exposed rooftops and seafront decks we offer weighted base options and will tell you plainly when a frame needs ballast.
Because the frames are welded and then coated to a standard colour, custom colours are practical in a way they are not with timber: a single RAL number is all we need, and matching a second order two years later is not a gamble on how the timber happened to be cut that season. That consistency is why so many contract and hospitality buyers pair an aluminium range with a teak one.
Where buyers are putting the AL-SF-5103 to work.
Light enough for one member of staff to reset the layout after an event, without the floor-loading questions a heavy timber set raises.
Bulk orders for developer handover where each unit gets the same set and nobody wants a maintenance call-back.
Deep seating that can stay out through a wet winter without a cover schedule or an annual oiling weekend.
Morning coffee and evening drinks in the same seats, with contract-grade foam that does not flatten in year two.
The compromise buyers ask for most often: the look and warmth of a timber-topped set, but a frame that does not need oiling and will not crack if it is left out through a wet winter. The oval teak-top coffee table is thick enough to re-sand years later.
Material: Powder-coated aluminium frame, hand-woven HDPE rope, solid teak table tops, quick-dry foam cushions in solution-dyed acrylic.
Every AL-SF-5103 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Wash with fresh water and a mild pH-neutral soap a few times a season — no polish, oil or sealer is required and none should be applied. Rinse thoroughly after cleaning in coastal or chlorinated environments. For scuff marks on the powder coating, a non-abrasive cream cleaner on a soft cloth usually lifts them without dulling the finish; do not use wire wool or aggressive solvents.
Size, finish, fabric, cushion density can all be adjusted on the AL-SF-5103, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships 1 set / 4 cartons, net weight 58 kg. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Rope-Weave Aluminium Sofa Set with Teak-Top Tables measures 207 × 82 × 78 cm overall; the full specification runs 3-seater size 207 × 82 × 78 cm, armchair size 91 × 81 × 78 cm, coffee table 119 × 61 × 41 cm, side table 55 × 55 × 52 cm. Net weight is 58 kg and it ships 1 set / 4 cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 5 sets. Mixed containers are fine — you can combine models across our aluminium sofa sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, fabric and cushion density can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
Yes — a single RAL number is all we need, applied to the whole frame rather than to panels, which is why a repeat order two years later matches the first without the variation you get when specifying natural timber. Custom powder colours may carry a small minimum quantity depending on the shade.
Yes. Rope and strap are woven over the frame rather than injected into it, so damaged sections can be re-woven on site with a repair length and a simple weaving tool. We supply spare rope in the frame colour with production orders and hold it in stock for current models.
A freshwater rinse a few times a season and a mild soap wash is the whole list. There is no oiling, sealing, sanding or re-varnishing, and unlike timber there is no colour change to expect. This AL-SF-5103 is the option for properties that will not run a furniture maintenance programme.
Yes, and many buyers do — teak for the visible statement pieces and aluminium where the maintenance burden would otherwise fall on staff. Both are built in our own workshops, so they ship together with a single loading plan and one set of documents.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Hand-woven rope on a rust-proof aluminium frame, with a matching privacy screen for open terraces.
Low flat-weave modules that reconfigure from a three-seater into a corner group.
Solid teak A-frame with a powder-coated aluminium core — the best of both materials.