Aluminium lounge sofa for terraces that will not run a furniture care programme.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
Aluminium lounge sofa for terraces that will not run a furniture care programme.
An aluminium lounge sofa built for terraces that see hard, unsupervised use. No oiling, no sealing — a freshwater rinse is the whole maintenance list.
The AL-SF-06 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
The questions buyers ask about aluminium seating are always the same: does the coating flake, does the weave sag, and does it get hot. All three come down to specification. We chromate pre-treat before powder coating so the finish keys into the metal chemically rather than sitting on the surface, we jig-weld 1.5–2.0 mm wall tube so the weave cannot pull the frame out of square, and we keep the load-bearing surfaces woven or cushioned rather than solid metal so guests are not touching a hot panel at midday.
Weight matters more than buyers expect. An aluminium sofa is roughly a third of the weight of the same teak section, which means one member of staff can reset a terrace layout in the morning instead of two — and it also means wind becomes the constraint rather than floor loading. For exposed rooftops and seafront decks we offer weighted base options and will tell you plainly when a frame needs ballast.
Where buyers are putting the AL-SF-06 to work.
Salt air attacks steel and untreated metal. Powder-coated aluminium with stainless fixings handles spray without rust streaks on pale decking.
Light enough for one member of staff to reset the layout after an event, without the floor-loading questions a heavy timber set raises.
Bulk orders for developer handover where each unit gets the same set and nobody wants a maintenance call-back.
Deep seating that can stay out through a wet winter without a cover schedule or an annual oiling weekend.
An aluminium lounge sofa built for terraces that see hard, unsupervised use. No oiling, no sealing — a freshwater rinse is the whole maintenance list.
Material: Powder-coated aluminium frame, UV-stabilised HDPE rope or strap weave, quick-dry cushions.
Every AL-SF-06 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Cushion covers zip off and can be spot-cleaned with mild soap, and the reticulated cores drain quickly, but storing them dry over a long off-season will extend their life by years. Check that all bolts are snug at the start of each season — aluminium does not corrode, but a bolt loosened by vibration still needs a quarter turn. Touch-up paint is available in the frame colour of your order.
Size, finish, fabric, cushion density can all be adjusted on the AL-SF-06, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Aluminium Sofa Set – 06 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 5 sets. Mixed containers are fine — you can combine models across our aluminium sofa sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, fabric and cushion density can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
Roughly a third of the weight for the same section — this AL-SF-06 is listed in the table above. That makes repositioning a one-person job and cuts freight per seat, but it also means wind becomes the consideration on exposed rooftops and seafront decks. Tell us the location and we will say plainly whether ballast is needed.
Yes, provided the wall thickness and joints are specified for it. We use 1.5–2.0 mm wall tube and stainless 304 fixings on frames rated for commercial service, and the AL-SF-06 is built to that standard rather than to retail tolerances. Static load figures can be supplied in writing for your operator or insurance file.
Yes — a single RAL number is all we need, applied to the whole frame rather than to panels, which is why a repeat order two years later matches the first without the variation you get when specifying natural timber. Custom powder colours may carry a small minimum quantity depending on the shade.
Yes. Rope and strap are woven over the frame rather than injected into it, so damaged sections can be re-woven on site with a repair length and a simple weaving tool. We supply spare rope in the frame colour with production orders and hold it in stock for current models.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Hand-woven rope on a rust-proof aluminium frame, with a matching privacy screen for open terraces.
Low flat-weave modules that reconfigure from a three-seater into a corner group.
Curved rope back with solid teak table tops — warmth of timber, maintenance of aluminium.