Aluminium lounge sofa for terraces that will not run a furniture care programme.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
Aluminium lounge sofa for terraces that will not run a furniture care programme.
An aluminium lounge sofa built for terraces that see hard, unsupervised use. No oiling, no sealing — a freshwater rinse is the whole maintenance list.
The AL-SF-03 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Weight matters more than buyers expect. An aluminium sofa is roughly a third of the weight of the same teak section, which means one member of staff can reset a terrace layout in the morning instead of two — and it also means wind becomes the constraint rather than floor loading. For exposed rooftops and seafront decks we offer weighted base options and will tell you plainly when a frame needs ballast.
Because the frames are welded and then coated to a standard colour, custom colours are practical in a way they are not with timber: a single RAL number is all we need, and matching a second order two years later is not a gamble on how the timber happened to be cut that season. That consistency is why so many contract and hospitality buyers pair an aluminium range with a teak one.
Where buyers are putting the AL-SF-03 to work.
The least attention-hungry seating you can put outside — it does not need a caretaker between bookings.
Developers furnish model units with one order; the frames survive being moved between plots.
Zero maintenance and no timber to oil, on the surface that gets the most sun and chlorine on the property.
Salt air attacks steel and untreated metal. Powder-coated aluminium with stainless fixings handles spray without rust streaks on pale decking.
An aluminium lounge sofa built for terraces that see hard, unsupervised use. No oiling, no sealing — a freshwater rinse is the whole maintenance list.
Material: Powder-coated aluminium frame, UV-stabilised HDPE rope or strap weave, quick-dry cushions.
Every AL-SF-03 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Wash with fresh water and a mild pH-neutral soap a few times a season — no polish, oil or sealer is required and none should be applied. Rinse thoroughly after cleaning in coastal or chlorinated environments. For scuff marks on the powder coating, a non-abrasive cream cleaner on a soft cloth usually lifts them without dulling the finish; do not use wire wool or aggressive solvents.
Size, finish, fabric, cushion density can all be adjusted on the AL-SF-03, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Aluminium Sofa Set – 03 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 5 sets. Mixed containers are fine — you can combine models across our aluminium sofa sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, fabric and cushion density can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
Yes — a single RAL number is all we need, applied to the whole frame rather than to panels, which is why a repeat order two years later matches the first without the variation you get when specifying natural timber. Custom powder colours may carry a small minimum quantity depending on the shade.
Yes. Rope and strap are woven over the frame rather than injected into it, so damaged sections can be re-woven on site with a repair length and a simple weaving tool. We supply spare rope in the frame colour with production orders and hold it in stock for current models.
A freshwater rinse a few times a season and a mild soap wash is the whole list. There is no oiling, sealing, sanding or re-varnishing, and unlike timber there is no colour change to expect. This AL-SF-03 is the option for properties that will not run a furniture maintenance programme.
Yes, and many buyers do — teak for the visible statement pieces and aluminium where the maintenance burden would otherwise fall on staff. Both are built in our own workshops, so they ship together with a single loading plan and one set of documents.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Hand-woven rope on a rust-proof aluminium frame, with a matching privacy screen for open terraces.
Low flat-weave modules that reconfigure from a three-seater into a corner group.
Curved rope back with solid teak table tops — warmth of timber, maintenance of aluminium.