Solid teak dining table specified to the seat count and room of your project.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
Solid teak dining table specified to the seat count and room of your project.
A specification-first teak table: tell us the head count and the room, and we set the length, edge profile and base style to match.
The TS-DT-12 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Tables are made in a workshop rather than bought in, which means lengths are adjustable in 20 cm steps, edges can be square or bull-nosed, and extension leaves are genuinely available rather than a catalogue footnote. Most importantly, replacement tops can be produced years later from the same pattern.
Top thickness is the single best predictor of how a table ages. Three centimetres is honest retail grade; four centimetres is what contract buyers specify because it resists cupping across long spans and survives being re-sanded years later. We will tell you which is appropriate rather than upselling thickness you do not need.
Where buyers are putting the TS-DT-12 to work.
A single long table for extended family — often ordered with matching benches instead of chairs.
Wide plank tops that read well against water and survive constant wiping between covers.
Volume SKUs customers recognise every season, packed knocked-down for efficient shelf delivery.
Practical tops that take daily use without looking institutional.
A specification-first teak table: tell us the head count and the room, and we set the length, edge profile and base style to match.
Material: Kiln-dried solid teak top, cross-battened for stability; length adjustable to your layout.
Every TS-DT-12 is cut, jointed, sanded and finished in PatioHue Outdoor's own workshop in Foshan, so the same hands make your sample and your production order. Nothing is outsourced to a second factory when volumes get tight.
Dried to 8–12% moisture before cutting, so the frame stays stable in humid or dry climates.
Mortise-and-tenon joints with 304 stainless bolts and brass inserts — no visible screw heads.
Cartons are drop-tested; KD options reduce container cube. Loading plans prepared per order.
Size, finish, cushion fabric and brand label can all be adjusted. Drawings accepted.
Long tables benefit from being covered or tilted under cover in prolonged wet months, though teak does not require it. Check that base bolts stay tight after the first season, and re-torque when the table is moved. Surface checking — fine hairline splits — is normal acclimatisation, not a defect.
Size, finish, hardware and edge profile can all be adjusted on the TS-DT-12, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Teak Dining Table – 12 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 10 sets. Mixed containers are fine — you can combine models across our teak dining tables range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
Any timber moves with humidity. We control it by kiln drying to 8–12%, quarter- or flat-sawing consistently, and cross-battening or adding a concealed steel spine underneath on long spans. That is why our long tables stay flat rather than cupping across the width.
Yes — lengths are adjustable in 20 cm steps. Custom work needs a drawing or dimension sheet; tooling cost is normally negligible and we quote drawing-to-sample in around three weeks.
Yes. Backless teak benches in matching widths are a common add-on for long tables and increase covers per table by 20–30%.
tops are crated with edge protection and shipped knocked-down where possible. We provide carton count, CBM and a loading plan so you can see how many tables fit a 40'HC before you commit to a freight booking.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Heavy-duty solid teak long table for hotel restaurants and banquet terraces.
Large round teak table with central pedestal base — easy seating, easy service.
Butterfly-leaf teak table that grows from 220 to 300 cm in under a minute.