Commercial Teak Round Table – Ø180 cm
WH-DT-3002 · Dining Tables

Commercial Teak Round Table – Ø180 cm

Large round teak table with central pedestal base — easy seating, easy service.

Pedestal baseAdjustable feetNo leg obstructionRadial teak top
MOQ
5 pcs
Price
Contact for price
Send Inquiry More teak dining tables

Specifications

SizeØ180 × 76 cm
Top Thickness3.5 cm
BaseTeak-clad pedestal
Seats8 – 10
FeetAdjustable levellers
N.W.70 kg
Package1 pc / 2 cartons
Product overview

Commercial Teak Round Table – Ø180 cm

Large round teak table with central pedestal base — easy seating, easy service.

A pedestal base means nobody bumps a table leg, and adjustable levellers keep the top steady on uneven stone or decking.

The WH-DT-3002 measures Ø180 × 76 cm overall. Key figures: size Ø180 × 76 cm, top thickness 3.5 cm, base Teak-clad pedestal, seats 8 – 10, shipped 1 pc / 2 cartons at a net weight of 70 kg. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.

Tables are made in a workshop rather than bought in, which means lengths are adjustable in 20 cm steps, edges can be square or bull-nosed, and extension leaves are genuinely available rather than a catalogue footnote. Most importantly, replacement tops can be produced years later from the same pattern.

Top thickness is the single best predictor of how a table ages. Three centimetres is honest retail grade; four centimetres is what contract buyers specify because it resists cupping across long spans and survives being re-sanded years later. We will tell you which is appropriate rather than upselling thickness you do not need.

Key features of the WH-DT-3002

  • Pedestal base — specified on this model and available across our teak dining tables range.
  • Adjustable feet — specified on this model and available across our teak dining tables range.
  • No leg obstruction — specified on this model and available across our teak dining tables range.
  • Radial teak top — specified on this model and available across our teak dining tables range.
  • Dimensions — Ø180 × 76 cm overall, size Ø180 × 76 cm, top thickness 3.5 cm, base Teak-clad pedestal, seats 8 – 10.
Where it works

Typical applications

Where buyers are putting the WH-DT-3002 to work.

Private villa courtyard

A single long table for extended family — often ordered with matching benches instead of chairs.

Beach club and pool restaurant

Wide plank tops that read well against water and survive constant wiping between covers.

Garden centre and retail programme

Volume SKUs customers recognise every season, packed knocked-down for efficient shelf delivery.

Corporate campus and staff dining

Practical tops that take daily use without looking institutional.

Material & build

How the WH-DT-3002 is made

A pedestal base means nobody bumps a table leg, and adjustable levellers keep the top steady on uneven stone or decking.

Material: Solid teak radial top, cast-aluminium pedestal core wrapped in teak, adjustable feet.

Every WH-DT-3002 is cut, jointed, sanded and finished in PatioHue Outdoor's own workshop in Foshan, so the same hands make your sample and your production order. Nothing is outsourced to a second factory when volumes get tight.

Kiln-Dried Timber

Dried to 8–12% moisture before cutting, so the frame stays stable in humid or dry climates.

Joinery & Hardware

Mortise-and-tenon joints with 304 stainless bolts and brass inserts — no visible screw heads.

Export Packing

Cartons are drop-tested; KD options reduce container cube. Loading plans prepared per order.

Customization

Size, finish, cushion fabric and brand label can all be adjusted. Drawings accepted.

Buyer's notes

What to check before ordering

  • Allow 60 cm of table edge per diner and 75 cm behind each chair for service aisles in hospitality layouts.
  • Adjustable feet solve most wobble complaints on stone, decking and tiled surfaces.
  • Extension leaves need a proper mechanism. Butterfly leaves stored under the top are the cleanest solution and need no separate storage.
  • Umbrella holes should be specified before production — retrofitting a hole through a finished top is possible but rarely clean.
  • Knocked-down (KD) tops reduce freight noticeably on long tables; ask for both KD and assembled quotes.

Care and maintenance

Long tables benefit from being covered or tilted under cover in prolonged wet months, though teak does not require it. Check that base bolts stay tight after the first season, and re-torque when the table is moved. Surface checking — fine hairline splits — is normal acclimatisation, not a defect.

Customisation, OEM and private label

Size, finish, hardware and edge profile can all be adjusted on the WH-DT-3002, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.

Packing, shipping and lead time

Ships 1 pc / 2 cartons, net weight 70 kg. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.

FAQ

Frequently asked questions

If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.

What are the exact dimensions of the WH-DT-3002?

Commercial Teak Round Table – Ø180 cm measures Ø180 × 76 cm overall; the full specification runs size Ø180 × 76 cm, top thickness 3.5 cm, base Teak-clad pedestal, seats 8 – 10. Net weight is 70 kg and it ships 1 pc / 2 cartons. If you need dimensions outside this range, we quote custom sizes from drawings.

What is the minimum order quantity for the WH-DT-3002?

MOQ is 5 pcs. Mixed containers are fine — you can combine models across our dining tables range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.

Do you offer OEM, custom sizes and private label?

Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.

Will a long table warp outdoors?

Any timber moves with humidity. We control it by kiln drying to 8–12%, quarter- or flat-sawing consistently, and cross-battening or adding a concealed steel spine underneath on long spans. That is why our long tables stay flat rather than cupping across the width.

Can we order a custom length?

Yes — lengths are adjustable in 20 cm steps. Custom work needs a drawing or dimension sheet; tooling cost is normally negligible and we quote drawing-to-sample in around three weeks.

Do you make benches to match?

Yes. Backless teak benches in matching widths are a common add-on for long tables and increase covers per table by 20–30%.

How is such a long table shipped?

Packed 1 pc / 2 cartons, tops are crated with edge protection and shipped knocked-down where possible. We provide carton count, CBM and a loading plan so you can see how many tables fit a 40'HC before you commit to a freight booking.

Get pricing for the WH-DT-3002

Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.

Send Inquiry Chat on WhatsApp
You may also like

Related products

Browse the full catalog · All teak dining tables