Solid teak dining table specified to the seat count and room of your project.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
Solid teak dining table specified to the seat count and room of your project.
A specification-first teak table: tell us the head count and the room, and we set the length, edge profile and base style to match.
The TS-DT-03 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
A long table is the anchor of any outdoor room. Ours are built from thick solid teak tops — no veneer, no engineered core — supported by frames sized for real use rather than showroom photography. Tops are cross-battened or reinforced underneath so they stay flat instead of cupping after the first wet winter.
Tables are made in a workshop rather than bought in, which means lengths are adjustable in 20 cm steps, edges can be square or bull-nosed, and extension leaves are genuinely available rather than a catalogue footnote. Most importantly, replacement tops can be produced years later from the same pattern.
Where buyers are putting the TS-DT-03 to work.
Banquet lengths with adjustable feet so staff can level the top on uneven stone.
A single long table for extended family — often ordered with matching benches instead of chairs.
Wide plank tops that read well against water and survive constant wiping between covers.
Volume SKUs customers recognise every season, packed knocked-down for efficient shelf delivery.
A specification-first teak table: tell us the head count and the room, and we set the length, edge profile and base style to match.
Material: Kiln-dried solid teak top, cross-battened for stability; length adjustable to your layout.
Every TS-DT-03 is cut, jointed, sanded and finished in PatioHue Outdoor's own workshop in Foshan, so the same hands make your sample and your production order. Nothing is outsourced to a second factory when volumes get tight.
Dried to 8–12% moisture before cutting, so the frame stays stable in humid or dry climates.
Mortise-and-tenon joints with 304 stainless bolts and brass inserts — no visible screw heads.
Cartons are drop-tested; KD options reduce container cube. Loading plans prepared per order.
Size, finish, cushion fabric and brand label can all be adjusted. Drawings accepted.
Clean with water and pH-neutral soap; a soft brush along the grain lifts embedded dirt. Expect the surface to weather to silver-grey outdoors — sand once lightly each spring if you want to keep it smooth. Resealing once or twice yearly preserves the honey tone. Use mats under very hot dishes to avoid local scorring.
Size, finish, hardware and edge profile can all be adjusted on the TS-DT-03, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Teak Dining Table – 03 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 10 sets. Mixed containers are fine — you can combine models across our teak dining tables range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
At Made to your required dimensions and allowing 60 cm of edge per person, the intended number seats comfortably — more if you use benches. Tell us your target head count and we will confirm whether this length or the next size up is the better fit.
The top is solid teak. Thick tops resist cupping and are what separate contract-grade tables from retail pieces that wobble after one season.
Any timber moves with humidity. We control it by kiln drying to 8–12%, quarter- or flat-sawing consistently, and cross-battening or adding a concealed steel spine underneath on long spans. That is why our long tables stay flat rather than cupping across the width.
Yes — lengths are adjustable in 20 cm steps. Custom work needs a drawing or dimension sheet; tooling cost is normally negligible and we quote drawing-to-sample in around three weeks.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Heavy-duty solid teak long table for hotel restaurants and banquet terraces.
Large round teak table with central pedestal base — easy seating, easy service.
Butterfly-leaf teak table that grows from 220 to 300 cm in under a minute.