Aluminium daybed and lounger built for daily commercial use.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
Aluminium daybed and lounger built for daily commercial use.
An aluminium lounger and daybed for commercial decks. No oiling, no rust, and a colour that matches across repeat orders.
The AL-SL-12 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Weight is the one thing to plan for. Aluminium loungers are light enough for one person to reposition, which is an advantage until the wind arrives. On exposed rooftops and seafront decks we offer weighted base options and will tell you plainly when a frame needs ballast rather than selling you something that will move.
Sun loungers take the worst of it: full sun, chlorinated splash, salt spray and guests who move them every day. Aluminium is the material that tolerates all four. The frames are welded and powder-coated in-house with a chromate pre-treatment, so nothing rusts onto pale decking, and the tops are either wide-pitch aluminium slats or tensioned mesh that drain instantly instead of holding water until tomorrow.
Where buyers are putting the AL-SL-12 to work.
The least attention-hungry furniture you can put outside — it does not need a caretaker between bookings.
The surface that gets the most sun and chlorine on the property, with no timber to oil and no cushion programme.
Salt air eats untreated metal; powder-coated aluminium with stainless fixings leaves no rust streaks on pale decking.
Round and cage daybeds give guests shade and privacy without enclosing them, and stay usable at midday.
An aluminium lounger and daybed for commercial decks. No oiling, no rust, and a colour that matches across repeat orders.
Material: Powder-coated aluminium frame and slats, 304 stainless fittings; stays cool and stacks for storage.
Every AL-SL-12 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Cushions: brush off sand, spot-clean with mild soap and water, and store dry during long wet periods or over the off-season — that alone adds years to their life. Slatted and mesh tops need only a rinse and dry in minutes. Touch-up paint is available in the frame colour of your order.
Size, finish, hardware and edge profile can all be adjusted on the AL-SL-12, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Aluminium Sun Lounger – 12 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 5 sets. Mixed containers are fine — you can combine models across our aluminium sun loungers range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
A freshwater rinse a few times a season, weekly in coastal or chlorinated locations, and a mild soap wash is the whole list. There is no oiling, sealing or re-varnishing, and unlike timber there is no colour change to expect. This AL-SL-12 is the option for properties that will not run a furniture maintenance programme.
Yes, and many buyers do — teak for the statement pieces and aluminium where the maintenance burden would otherwise fall on staff. Both are built in our own workshops, so they ship together with a single loading plan and one set of documents.
It depends on the top. The AL-SL-12 is specified with wide-pitch aluminium slats, so it is comfortable without a cushion and drains instantly. A pad is available if guests expect one.
The AL-SL-12 adjusts through several positions from upright reading to flat sunbathing. Catches are metal rather than plastic, and they are the part we hold spares for.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Flat-packable slatted lounger that stays cool to the touch and stacks for winter.
Mesh-frame lounger with a drainage cushion and a matching side table.
Full-circle daybed with a woven rope back — a focal point for poolside and spa decks.
Browse the full catalog · All aluminium sun loungers and daybeds