A rust-free aluminium lounger, light enough to reset by one person.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
A rust-free aluminium lounger, light enough to reset by one person.
A rust-free aluminium lounger for properties that will not run a cushion programme. Light enough for one person to reposition, robust enough for daily guest use.
The AL-SL-11 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Daybeds are a different buying decision — they sell a photograph as much as a seat. Our round and cage designs are sized to fit a standard cabana rather than dominate it, and the open weave keeps air moving, which is precisely why guests use them at midday when cushioned seating is too hot.
Weight is the one thing to plan for. Aluminium loungers are light enough for one person to reposition, which is an advantage until the wind arrives. On exposed rooftops and seafront decks we offer weighted base options and will tell you plainly when a frame needs ballast rather than selling you something that will move.
Where buyers are putting the AL-SL-11 to work.
Low maintenance and low weight, which matters on any deck where load is calculated.
The least attention-hungry furniture you can put outside — it does not need a caretaker between bookings.
The surface that gets the most sun and chlorine on the property, with no timber to oil and no cushion programme.
Salt air eats untreated metal; powder-coated aluminium with stainless fixings leaves no rust streaks on pale decking.
A rust-free aluminium lounger for properties that will not run a cushion programme. Light enough for one person to reposition, robust enough for daily guest use.
Material: Powder-coated aluminium frame and slats, 304 stainless fittings; stays cool and stacks for storage.
Every AL-SL-11 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Rinse with fresh water weekly in coastal or chlorinated environments to remove salt and chemical residue. Wash the frame a few times a season with a mild pH-neutral soap — no polish, oil or sealer is required and none should be applied. Check that backrest catches and wheel bolts stay tight at the start of each season.
Size, finish, hardware and edge profile can all be adjusted on the AL-SL-11, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Aluminium Sun Lounger – 11 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 5 sets. Mixed containers are fine — you can combine models across our aluminium sun loungers range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
Aluminium is roughly a third of the weight of the equivalent teak frame, which is an advantage for staff and a question in the wind. Tell us the location: for exposed rooftops and seafront decks we supply weighted base options and will say plainly when a frame needs ballast rather than selling you something that will move.
Yes — the AL-SL-11 stacks, which is what makes off-season storage realistic rather than a corridor full of beds.
A freshwater rinse a few times a season, weekly in coastal or chlorinated locations, and a mild soap wash is the whole list. There is no oiling, sealing or re-varnishing, and unlike timber there is no colour change to expect. This AL-SL-11 is the option for properties that will not run a furniture maintenance programme.
Yes, and many buyers do — teak for the statement pieces and aluminium where the maintenance burden would otherwise fall on staff. Both are built in our own workshops, so they ship together with a single loading plan and one set of documents.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Flat-packable slatted lounger that stays cool to the touch and stacks for winter.
Mesh-frame lounger with a drainage cushion and a matching side table.
Full-circle daybed with a woven rope back — a focal point for poolside and spa decks.
Browse the full catalog · All aluminium sun loungers and daybeds