Aluminium Sun Lounger with Slatted Top
Flat-packable slatted lounger that stays cool to the touch and stacks for winter.

A rust-free aluminium lounger, light enough to reset by one person.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
A rust-free aluminium lounger, light enough to reset by one person.
A rust-free aluminium lounger for properties that will not run a cushion programme. Light enough for one person to reposition, robust enough for daily guest use.
The AL-SL-05 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Sun loungers take the worst of it: full sun, chlorinated splash, salt spray and guests who move them every day. Aluminium is the material that tolerates all four. The frames are welded and powder-coated in-house with a chromate pre-treatment, so nothing rusts onto pale decking, and the tops are either wide-pitch aluminium slats or tensioned mesh that drain instantly instead of holding water until tomorrow.
The specification questions that matter on a lounger are backrest positions, whether it stacks, and whether it needs a cushion. Four to five backrest positions cover reading and flat sunbathing; loungers that stack cut off-season storage to a fraction of the space; and a slatted or mesh top needs no cushion at all, which removes the whole business of bringing twelve cushions in every evening.
Where buyers are putting the AL-SL-05 to work.
The surface that gets the most sun and chlorine on the property, with no timber to oil and no cushion programme.
Salt air eats untreated metal; powder-coated aluminium with stainless fixings leaves no rust streaks on pale decking.
Round and cage daybeds give guests shade and privacy without enclosing them, and stay usable at midday.
A daybed reads as a private room from across the deck and costs a fraction of a built cabana.
A rust-free aluminium lounger for properties that will not run a cushion programme. Light enough for one person to reposition, robust enough for daily guest use.
Material: Powder-coated aluminium frame and slats, 304 stainless fittings; stays cool and stacks for storage.
Every AL-SL-05 is cut, welded, chromate pre-treated and powder-coated on PatioHue Outdoor's own line in Foshan, and the rope or strap is woven by hand in the same building. Nothing is subcontracted when volumes get tight — which is why a repeat frame two years later still matches the first one.
Chemical keying before powder coating — this is what stops the finish flaking at weld edges in year three.
Contract-grade wall thickness, jig-welded and kept square, so the weave cannot work loose around the frame.
Roughly a third of the weight of a teak equivalent, foam-wrapped with corner protection in drop-tested cartons.
Custom powder colour from a single RAL number, with a repeat order that matches years later.
Rinse with fresh water weekly in coastal or chlorinated environments to remove salt and chemical residue. Wash the frame a few times a season with a mild pH-neutral soap — no polish, oil or sealer is required and none should be applied. Check that backrest catches and wheel bolts stay tight at the start of each season.
Size, finish, hardware and edge profile can all be adjusted on the AL-SL-05, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Aluminium Sun Lounger – 05 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 5 sets. Mixed containers are fine — you can combine models across our aluminium sun loungers range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, hardware and edge profile can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
It depends on the top. The AL-SL-05 is specified with wide-pitch aluminium slats, so it is comfortable without a cushion and drains instantly. A pad is available if guests expect one.
The AL-SL-05 adjusts through several positions from upright reading to flat sunbathing. Catches are metal rather than plastic, and they are the part we hold spares for.
Not with the specification used on the AL-SL-05. The frame is degreased and chromate pre-treated before the powder is applied and cured, so the coating keys into the metal chemically rather than sitting on it. That is the difference between a finish that survives salt and chlorinated splash for years and one that starts lifting at the weld edges after a couple of seasons.
Bare aluminium does absorb heat, which is why specification matters. On the AL-SL-05 the lying surface is wide-pitch aluminium slats with air moving between them, so it stays noticeably cooler than a closed metal panel and dries minutes after a shower.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Flat-packable slatted lounger that stays cool to the touch and stacks for winter.
Mesh-frame lounger with a drainage cushion and a matching side table.
Full-circle daybed with a woven rope back — a focal point for poolside and spa decks.
Browse the full catalog · All aluminium sun loungers and daybeds