A warm, natural teak sofa built around how guests actually sit outdoors.
Payment terms: 50% deposit to start production; the 50% balance after your inspection confirms the goods, before shipment.
| Custom Sizing | Made to your required dimensions |
|---|
A warm, natural teak sofa built around how guests actually sit outdoors.
Natural teak lounge seating for terraces that see daily use. The frame uses mortise-and-tenon joinery rather than screw assembly, and the cushions dry quickly after rain. Every dimension is built to your layout.
The TS-SF-02 measures Made to your required dimensions overall. Key figures: custom sizing Made to your required dimensions. Small changes to any of these numbers can be quoted from a drawing, so a project does not have to be built around whatever a catalogue happened to list.
Comfort outdoors comes down to three things: seat depth, foam density and how fast the cushion dries after rain. We specify deep seats for lounging rather than perching, high-resilience foam that does not flatten in year two, and reticulated quick-dry cores with mesh bases so a shower does not put half your terrace out of service until tomorrow.
Deep seating is what turns a terrace from a paved area into a room people actually use. Our solid teak sofa frames are cut from kiln-dried timber and joined with mortise-and-tenon joints, then paired with quick-dry cushions wrapped in solution-dyed acrylic. The result holds its shape through daily hospitality service, survives being left out in the rain, and still looks inviting at the end of a long season.
Where buyers are putting the TS-SF-02 to work.
Under a glazed roof the timber stays stable because it was dried to 8–12% moisture before cutting.
The shaded veranda is the most-used room in a warm-climate house. Deep seats and a low coffee table give families somewhere to sit long after the table has been cleared.
Morning coffee service and evening drinks both land here. Contract-grade foam keeps seat cushions from flattening under back-to-back guests.
Salt air eats untreated metal. Solid teak with 304 stainless hardware and acrylic fabric handles sea spray without rust streaks on the deck.
Natural teak lounge seating for terraces that see daily use. The frame uses mortise-and-tenon joinery rather than screw assembly, and the cushions dry quickly after rain. Every dimension is built to your layout.
Material: Solid Indonesian teak frame with mortise-and-tenon joinery, paired with quick-dry solution-dyed acrylic cushions.
Every TS-SF-02 is cut, jointed, sanded and finished in PatioHue Outdoor's own workshop in Foshan, so the same hands make your sample and your production order. Nothing is outsourced to a second factory when volumes get tight.
Dried to 8–12% moisture before cutting, so the frame stays stable in humid or dry climates.
Mortise-and-tenon joints with 304 stainless bolts and brass inserts — no visible screw heads.
Cartons are drop-tested; KD options reduce container cube. Loading plans prepared per order.
Size, finish, cushion fabric and brand label can all be adjusted. Drawings accepted.
Cushion covers unzip and machine wash at 30°C, so properties can launder between seasons rather than replacing. Frames get a freshwater rinse in coastal locations to remove salt film, and bolt threads benefit from a check once a year. Expect surface checking — fine hairline splits that appear as timber acclimatises; they are cosmetic and do not affect structural strength.
Size, finish, fabric, cushion density can all be adjusted on the TS-SF-02, and we accept drawings or reference photographs. PatioHue Outdoor builds in-house, so confirming a change takes a workshop decision rather than a chain of suppliers. Private-label cartons, instruction sheets and logo application are available from the stated MOQ.
Ships in export cartons. Standard production runs 25–35 days after deposit depending on quantity and finish, with FOB Shenzhen or Nansha loading. We issue a carton-by-carton loading plan before every shipment so you can book freight against real numbers.
If your question is not here, message us on WhatsApp — we answer technical questions directly from the workshop.
Teak Sofa Set – 02 measures Made to your required dimensions overall; the full specification runs custom sizing Made to your required dimensions. Net weight is listed in the table above and it ships export cartons. If you need dimensions outside this range, we quote custom sizes from drawings.
MOQ is 5 sets. Mixed containers are fine — you can combine models across our teak sofa sets range, and we will prepare one loading plan for the whole shipment. Sample orders below MOQ are possible at a small premium.
Yes. Size, finish, fabric and cushion density can all be adjusted, and we accept drawings or reference photos. We can add your logo, produce private-label cartons and documentation. PatioHue Outdoor is the factory, so you are specifying directly with the people who build it.
Each TS-SF-02 is packed in export cartons, cartons are drop-tested, and corner protection and foam sheet are standard. We issue a per-order loading plan showing carton count, cube (CBM) and container utilisation before shipment.
Yes. Sample orders are welcome and priced at a small premium over container quantities; the sample cost is credited back once the production order is placed.
Yes. The cushions use reticulated quick-dry foam with a mesh base, so water passes through instead of pooling. The covers are solution-dyed acrylic, removable and machine washable. Left out in normal rain the TS-SF-02 cushions dry in roughly an hour; for prolonged wet weather we still recommend standing them on edge or storing them dry.
Yes. Any colour from the standard Sunbrella or olefin card is available from the stated MOQ. Custom colours outside those cards need roughly 500–800 m of fabric, which usually means 15–20 sets — for smaller runs we can usually find a close match within the existing range.
Tell us the quantity, destination port and finish you need. We reply with price, lead time and a loading plan — usually within 12 hours.
Deep-seat teak sofa with quick-dry cushions, built for covered patios and garden rooms.
Modular five-seat configuration for large terraces and hotel lounges.
Solid teak frame with woven PE-rattan panels — natural look, zero maintenance.